Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more.
Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM.
1. Title of Book - p. Cover 2. Cover image - p. Cover 3. Title page - p. ii 4. Table of Contents - p. iii 5. Copyright - p. iii 6. Contributors - p. xiii 7. Preface - p. xix 8. Section A: Waste for aggregates in cement-based materials - p. xix 9. 1. Modeling the interfacial transition zone between recycled aggregates and industrial waste in cementitious matrix - p. 8 10. 2. Waste for aggregates in ultrahigh performance concrete (UHPC) - p. 29 11. 3. Use of coal bottom ash and other waste as fine aggregates in lightweight cement-based materials - p. 53 12. 4. Residual biomasses as aggregates applied in cement-based materials - p. 97 13. 5. Technical and economic implications of using recycled fiber-reinforced polymer waste as aggregate in concrete - p. 139 14. Section B: Waste for binders and additions - p. 150 15. 6. Application of phosphogypsum for the improvement of eco-efficient cements - p. 153 16. 7. Effect of wastes as supplementary cementitious materials on the transport properties of concrete - p. 212 17. 8. Fly ash-incorporated recycled coarse aggregate-based concrete - p. 229 18. 9. Industrial waste from biomass-fired electric power plants as alternative pozzolanic material - p. 252 19. 10. Inorganic binders from petrochemical industry waste: The case of fluid catalytic cracking catalyst residue - p. 283 20. 11. Utilization of metallurgical wastes as raw materials for manufacturing alkali-activated cements - p. 349 21. Section C: Optimization of concrete and mortar for a circular economy - p. 383 22. 12. Multirecycled concrete aggregates in concrete production - p. 387 23. 13. Radiological shielding concrete using steel slags - p. 413 24. 14. Self-compacting concrete also standing for sustainable circular concrete - p. 455 25. 15. Optimization of self-compacting recycled concrete manufactured with waste and byproducts - p. 495 26. 16. Rheological behavior of recycled aggregate concrete - p. 505 27. 17. Active-state corrosion in recycled aggregate concrete - p. 545 28. Section D: Environmental implications of the use of waste in cement-based materials - p. 564 29. 18. Comprehensive environmental evaluation of photocatalytic eco-blocks produced with recycled materials - p. 567 30. 19. Leaching assessment methodologies and regulations for evaluating the use of secondary and recycled materials in concrete and mortars - p. 583 31. 20. Methodology for the evaluation of the life cycle in research on cement-based materials - p. 601 32. 21. Cement treatment of recycled concrete aggregates and incinerator bottom ash as road bases in pavements - p. 617 33. 22. Alternative secondary raw materials for road construction based on pulp and paper industry waste - p. 635 34. 23. Ladle furnace slags for construction and civil works: A promising reality - p. 665 35. 24. Real-scale applications of waste in cement-based materials in building - p. 681 36. 25. Fatigue in recycled aggregate concrete for railway superstructure applications - p. 715 37. 26. Normative review and necessary advances to promote the use of recycled aggregates and by-products in cement-based materials - p. 737 38. Index - p. 777
Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more.
Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM.
1. Title of Book - p. Cover 2. Cover image - p. Cover 3. Title page - p. ii 4. Table of Contents - p. iii 5. Copyright - p. iii 6. Contributors - p. xiii 7. Preface - p. xix 8. Section A: Waste for aggregates in cement-based materials - p. xix 9. 1. Modeling the interfacial transition zone between recycled aggregates and industrial waste in cementitious matrix - p. 8 10. 2. Waste for aggregates in ultrahigh performance concrete (UHPC) - p. 29 11. 3. Use of coal bottom ash and other waste as fine aggregates in lightweight cement-based materials - p. 53 12. 4. Residual biomasses as aggregates applied in cement-based materials - p. 97 13. 5. Technical and economic implications of using recycled fiber-reinforced polymer waste as aggregate in concrete - p. 139 14. Section B: Waste for binders and additions - p. 150 15. 6. Application of phosphogypsum for the improvement of eco-efficient cements - p. 153 16. 7. Effect of wastes as supplementary cementitious materials on the transport properties of concrete - p. 212 17. 8. Fly ash-incorporated recycled coarse aggregate-based concrete - p. 229 18. 9. Industrial waste from biomass-fired electric power plants as alternative pozzolanic material - p. 252 19. 10. Inorganic binders from petrochemical industry waste: The case of fluid catalytic cracking catalyst residue - p. 283 20. 11. Utilization of metallurgical wastes as raw materials for manufacturing alkali-activated cements - p. 349 21. Section C: Optimization of concrete and mortar for a circular economy - p. 383 22. 12. Multirecycled concrete aggregates in concrete production - p. 387 23. 13. Radiological shielding concrete using steel slags - p. 413 24. 14. Self-compacting concrete also standing for sustainable circular concrete - p. 455 25. 15. Optimization of self-compacting recycled concrete manufactured with waste and byproducts - p. 495 26. 16. Rheological behavior of recycled aggregate concrete - p. 505 27. 17. Active-state corrosion in recycled aggregate concrete - p. 545 28. Section D: Environmental implications of the use of waste in cement-based materials - p. 564 29. 18. Comprehensive environmental evaluation of photocatalytic eco-blocks produced with recycled materials - p. 567 30. 19. Leaching assessment methodologies and regulations for evaluating the use of secondary and recycled materials in concrete and mortars - p. 583 31. 20. Methodology for the evaluation of the life cycle in research on cement-based materials - p. 601 32. 21. Cement treatment of recycled concrete aggregates and incinerator bottom ash as road bases in pavements - p. 617 33. 22. Alternative secondary raw materials for road construction based on pulp and paper industry waste - p. 635 34. 23. Ladle furnace slags for construction and civil works: A promising reality - p. 665 35. 24. Real-scale applications of waste in cement-based materials in building - p. 681 36. 25. Fatigue in recycled aggregate concrete for railway superstructure applications - p. 715 37. 26. Normative review and necessary advances to promote the use of recycled aggregates and by-products in cement-based materials - p. 737 38. Index - p. 777
